Got a Dodge Intrepid, 2.7 setting a P0344 intermittent loss of cam sensor signal. Cam offset is 5 degrees on startup. Doesnt set the code until you drive 20 miles. I got 2 cam sensor waveform saves. 1 from a 2002 with no problem, & the problem vehicle 2004 Intrepid. Looks like the cam square wave is wider than it should be. Both vehicles have the same cam sprocket trigger wheel part number according to Chryslers website. The First screen save is from the 02 & is a good one. I am not sure about the second, it doesnt look right.
Intrepid.ShopStreamConnectData_copy:C:\Documents and Settings\HP_Administrator\My Documents\ShopStream\Vantage Pro Files\User006_00101091450.LSP
ShopStreamConnectData_copy:C:\Documents and Settings\HP_Administrator\My Documents\ShopStream\Vantage Pro Files\User007_00101092726.LSP
Intrepid.ShopStreamConnectData_copy:C:\Documents and Settings\HP_Administrator\My Documents\ShopStream\Vantage Pro Files\User006_00101091450.LSP
ShopStreamConnectData_copy:C:\Documents and Settings\HP_Administrator\My Documents\ShopStream\Vantage Pro Files\User007_00101092726.LSP
Comment