Pressure transducer specs

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • carmedic
    Member
    • Apr 2007
    • 65

    Pressure transducer specs

    Is there somewhere to look up the output specs for the Snap-On pressure transducers? I know the MODIS calibrates and configures the scope for them automatically, but I'm curious to know what the conversion factors are. When using the 500 psi transducer, the scaling choices are 50, 100, 250 and 500 psi. There are times when a 150 psi scale would be nice, perhaps even a 200 psi scale.


    Jim
  • DougMontgomery
    Senior Member
    • Jul 2007
    • 194

    #2
    If your talking volt vs pressure...I posted on iATN for that info and NOBODY helped. So I built a test jig and got the answer myself.

    Here you go

    Well..seems you can't upload an XLS sheet here

    Sooooo, I will convert to PDF
    Attached Files

    Comment

    • salvaje07
      Senior Member
      • Jan 2008
      • 196

      #3
      You can also freeze your reading, then use the zoom feature to blow it up, or back it put. Work great on any test, especially on KOEC tests.

      Comment

      • carmedic
        Member
        • Apr 2007
        • 65

        #4
        Thanks, Douglas

        Thank you to Douglas Montgomery for the .pdf file. I just saved it and will review it when I get a chance later tonight. As for zooming, once you zoom and image from its original, you can't put cursors on it, at least that's been my experience with the tool or with Shopstream Connect.

        Thanks for the replies.

        Jim

        Comment

        Working...