If this is your first visit, be sure to
check out the FAQ. You may have to register
before you can post: click the register link to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
In my new Solus Ultra (11.4) under settings, I can see where to set the time and time format, as well as date format, but I do not see anywhere to set the actual current day/month/year.
I cannot believe snap on has not taken care of that yet!! My solus pro has the same fault. It has been discussed many times on many different forums and still no remedy. I always thought it would be handled thru an update but nothing as of yet. I guess you are stuck with what ever date is displayed. I wonder if you stick a usb keyboard on it, if you would get access to the windows operating system. You could do this with the older modis.
I am using the 11.4 software and can set the clock by navigating to Tools and Setup, Settings, and Clock Settings. See attached image.
Originally posted by BMW JEDI
In my new Solus Ultra (11.4) under settings, I can see where to set the time and time format, as well as date format, but I do not see anywhere to set the actual current day/month/year.
What am I missing here?
Thank you, but what I am looking for is how to set the date
Hi I am not really sure but try this.Using Shop Stream Connect.. connect Scanner to PC.Pick tools and it should acknowledge the Scanner you have plugged in. Look for Software update if there is one it will update yours. It did for my Solus Pro. I believe the date and clock will be set then. HTH..Keep Smiling.
Is there a concrete way to change the date and not just the time?
Thread revival I know
Mine was out by one day when I got it. It was one day slow. I set the time to 11:58-PM and then backed out and shut it down.
I then went and had a coffee and came back a few minutes later and it had transitioned past midnight and was only a few minutes into the correct date.
All I had to do then was set the time again for what was now the correct day.
HTH
Comment