![]() |
Diagnostic Home . Diagnostic Product Index . Customer Care |
|
You are currently NOT logged in to a registered account. Some functions of Snap-on Diagnostics Product Forums will not be available to you if your are not logged in as a registered member. For a limited time only, registrationto Snap-on Diagnostics Product Forums to Snap-on Diagnostics Product Forums is !! FREE !! Select the **REGISTER NOW** link to register for your FREE Snap-on Diagnostics Product Forums account!! |
![]() |
|
Thread Tools | Display Modes |
#11
|
|||
|
|||
![]() Quote:
![]() ![]() ![]() http://productforum.autorepairdata.c...ternal+battery |
#12
|
|||
|
|||
![]() aloha,
Anyone know where Modis replacement battery cells can be purchased? When I took the battery pack apart I found that there were 7 cells inside. I've looked quite a bit, but I haven't found any battery cells that even come close. Any thoughts? aloha. |
#13
|
|||
|
|||
![]() I'm having my modis battery rebuilt by Batteries Plus Bulbs. Maybe that's something they'd be able to sell to you.
|
#14
|
||||
|
||||
![]() Could you post a photo of one of the cells, with something in the photo so we can determine the size [like a ruler or tape measure]? Are the cells somewhat smaller than a typical C cell? If so, that IS a standard size cell.
|
#15
|
|||
|
|||
![]() Quote:
All individual cells are 1.2 Volts, UNLESS Lithium Ion, these are 3 volts. Look on eBay for cells of the voltage needed, and find tagged ( easier to solder together ) in a current ( Amp/Hr ) rating suitable for your need. That's all I do, waiting for some 6 Amp/Hr cells now for a Solus Pro battery rebuild ![]() |
#16
|
|||
|
|||
![]() Quote:
Thanks for the information. As close as I can tell...the OEM cells are around 1.7v, (1.7x7=11.9) and since there really aren't any markings on the cells, so I have no idea of the MH. The brand is Sanyo. I've put the battery back together for the time being, so sorry, no pictures at this time. However, I did take some rough measurements with a tape measure while I had the pack apart and found these results. 2 5/8" long x 5/8" in diameter. As stated, these were rough measurements using a tape measure. I have seen some cells for the Solus pro on flea bay, or better that I should say that I have seen cells that others have said would work in a Solus pro on that site, but nothing that even comes close when looking for these Sanyo cells. I have found 1.7v cells, but again, nothing that's even close in size. I'm finding it hard believing that these are special use cells, but it's sure looking that way. Man... these people haven't missed a trick when protecting copyrights. It's a shame that there wasn't as much thought put into making a longer lasting product as was put into the copyright and software protection. From what I can tell, the Solus pro cell is much different in shape (shorter & fatter) than the ones used in the Modis, and @ 1.5v, it's doubtful that the required 8 of the those cells would even fit into a Modis pack. For the cost of those Solus cells, it might be worth buying a set and seeing if they'll work. Please let me know if I'm mistaken about any of this. aloha |
#17
|
|||
|
|||
![]() Quote:
![]() |
#18
|
|||
|
|||
![]() Quote:
I see a lot of eBay/Amazon vendors selling the same stuff - 24 watt batteries, not 36 watt like the OE power supply/charger. With so many people (and many of them non-electrinic/battery specialists) selling the same stuff, I'm dubious of the quality of many of them. Any specific recommendations for manufacturers/vendors? |
#19
|
||||
|
||||
![]() It's been 5 years this month since I had MTO rebuild the battery pack on my Modis Elite. It still works and keeps a charge.
|
#20
|
|||
|
|||
![]() i might have one when i get a new one. not sure if that is why the modis does not work
|
![]() |
Thread Tools | |
Display Modes | |
|
|